Direct answer: The Eagle 2000 APT 1 HP is an industrial slide-gate operator for gates up to 50 feet and 2,500 pounds on Eagle’s current product page. It is a fail-secure design, so a hand crank is used to open the gate when power is off.
It uses #40 nickel-plated chain and is built for heavy commercial and industrial use.
Direct answer: The Eagle 2000 FR 1 HP is a heavy commercial slide-gate operator rated for gates up to 45 feet and 2,000 pounds. It uses a 1 HP continuous-duty 115 VAC motor and moves the gate at about 12 inches per second.
The FR foot pedal releases the operator so the gate can be pushed by hand during a power outage.
Direct answer: The Eagle 200 DM is a high-traffic swing-gate operator with two 1/2 HP motors. One motor opens the gate and the other closes it. Eagle rates it for gates up to 20 feet and 750 pounds.
It is built for places that cycle the gate often, such as apartment buildings or busy commercial entrances.
Direct answer: The Eagle 200 1/2 HP is a commercial swing-gate operator for gates up to 20 feet and 750 pounds. It uses a 1/2 HP continuous-duty 115 VAC motor and takes about 18 seconds to move from 0° to 90°.
The quick-release lever lets the gate be moved by hand during a power outage. Eagle also lists Power I as an optional battery backup.
Direct answer: The Eagle 100 is a residential/light-commercial swing-gate operator rated for gates up to 18 feet and 600 pounds. Eagle specifies a 1/2 HP continuous-duty 120 VAC motor and approximately 18 seconds to move from 0° to 90°.
The operator needs to match the gate’s actual weight, length, hinge condition, travel path, and required safety setup. Eagle documents an optional Power I battery-backup system; the AC Eagle 100 is different from the Eagle 100-DC model.
Direct answer: The Eagle 2000 FR is a commercial sliding-gate operator rated for gates up to 45 feet and 1,000 pounds. It uses a 1/2 HP continuous-duty 115 VAC motor and a foot-release pedal for manual movement during a power outage.
This is a materially larger-duty operator than the Eagle 1000 FR. Eagle lists the 2000 FR for Class I, II, III, and IV applications and rates it for continuous duty. The separate Eagle 2000 FR 1HP model raises the weight rating to 2,000 pounds.
Direct answer: The Eagle 1000 FR is a residential/light-commercial sliding-gate operator for gates up to 27 feet and 600 pounds. It uses a 1/2 HP continuous-duty 115 VAC motor and a foot-release mechanism so the gate can be pushed open during a power outage after the operator is disengaged.
The published 27-foot and 600-pound limits are maximum ratings. The gate still needs to roll freely, be installed correctly, and use the required safety devices. This AC model is not listed as solar-ready by Eagle; the Eagle 1000 DC is a separate model.