Direct answer: Eagle identifies the E555 Diamond control board as compatible with the Eagle 100, 1000, 200, 2000, 2000-APT, and OH operator families.
Important replacement warning: Gate Operators Direct’s current E555 listing specifically says its SKU is for gate operators manufactured before January 2016 and non-UL applications. A replacement-board purchase should therefore be matched to the operator’s date and board revision, not just the model-family name.
Direct answer: Eagle specifies #41 nickel-plated chain for the Eagle 1000 series. Gate Operators Direct sells a 41-1R x 10-foot replacement chain specifically for the Eagle 1000 Series and Eagle I.
Direct answer: Eagle specifies #40 nickel-plated chain for the Eagle 2000 FR series. Gate Operators Direct sells a 40-1R x 10-foot replacement chain specifically for Eagle-2000 Series operators.
Direct answer: Power I is Eagle’s optional battery-backup system for several 1/2 HP AC operator families. Eagle lists it for the Eagle 100, Eagle 1000, and 1/2 HP Eagle 2000 models.
Published backup-cycle counts vary by model and gate load. Eagle notes that real battery-only cycles depend on gate length and weight, so the published number should be treated as an estimate rather than a guarantee.
Direct answer: The Eagle 100 is a residential/light-commercial swing-gate operator rated for gates up to 18 feet and 600 pounds. Eagle specifies a 1/2 HP continuous-duty 120 VAC motor and approximately 18 seconds to move from 0° to 90°.
The operator needs to match the gate’s actual weight, length, hinge condition, travel path, and required safety setup. Eagle documents an optional Power I battery-backup system; the AC Eagle 100 is different from the Eagle 100-DC model.
Direct answer: The Eagle 2000 FR is a commercial sliding-gate operator rated for gates up to 45 feet and 1,000 pounds. It uses a 1/2 HP continuous-duty 115 VAC motor and a foot-release pedal for manual movement during a power outage.
This is a materially larger-duty operator than the Eagle 1000 FR. Eagle lists the 2000 FR for Class I, II, III, and IV applications and rates it for continuous duty. The separate Eagle 2000 FR 1HP model raises the weight rating to 2,000 pounds.
Direct answer: The Eagle 1000 FR is a residential/light-commercial sliding-gate operator for gates up to 27 feet and 600 pounds. It uses a 1/2 HP continuous-duty 115 VAC motor and a foot-release mechanism so the gate can be pushed open during a power outage after the operator is disengaged.
The published 27-foot and 600-pound limits are maximum ratings. The gate still needs to roll freely, be installed correctly, and use the required safety devices. This AC model is not listed as solar-ready by Eagle; the Eagle 1000 DC is a separate model.